Home-knowledge-

Content

Hyaluronic Acid Bulk: 99%, Three Grades and No MW Line

Nov 18, 2026

Candy
Candy
Quality & Analytical Manager with 10+ years of experience. Expert in analytical method development and validation (e.g., HPLC), ensuring raw materials and final products meet global quality standards.

Our hyaluronic acid powder page prints CAS 9004-61-9, EINECS 232-678-0, a specification of 99%, HPLC as the test method, a formula written as (C14H21NO11)n, three grade names on one line, and a shelf life of two years. It does not print a molecular weight. That omission is not a gap in the layout. It is a question about what the 99% is measuring, and any buyer who needs hyaluronic acid at a particular chain length has to establish which line is supposed to carry that figure. That is the subject here.

01 99% Is a Content Figure, Not a Chain Length

What does the 99% figure actually measure?

It measures content: how much of the declared substance is present in the sample prepared for the run, read against a reference standard under the stated conditions. It answers "how much", and it answers nothing else. A content figure is a statement about the amount of material, not about the size of the molecules that make it up.

Can two lots at 99% have different chain lengths?

Yes, and this is the point most quotations skip. Content and length are independent properties. Two lots can both report 99% and differ in average chain length by a wide margin; both figures are true, and the figure on its own does not tell you which lot you are holding. That is why a specification written only around content leaves the buyer comparing two numbers that were never the whole description.

02 What Molecular Weight Changes on a Specification Sheet

Which line should a molecular weight figure sit on?

Its own line, with the method and the weighting convention beside it, in the body of the table rather than in a footnote. A figure placed in a note is a figure that will be omitted from the next revision. Anything a buyer is expected to compare belongs in the table, where the comparison happens.

Why does an average figure need a method beside it?

Because an average over a distribution depends on how the distribution is weighted. Different conventions weight large and small chains differently, so the same lot can return different numbers depending on which convention the laboratory used. A molecular weight without the convention attached is not a specification; it is a number that happens to have been printed.

FieldWhat the page printsWhat a certificate should carryWhat to confirm before booking
Specification99%The same figure with its method namedWhether 99% is a floor or a window
Molecular weightNot printedIts own line, with method and conventionWhich convention the figure uses
Test methodHPLCThe conditions behind the runWhat the method resolves
Name and salt formOne name, no form statedThe name of the form actually shippedThat the certificate matches the order
Grade standardThree grades on one lineThe grade claimed, with its document setWhich limits that grade implies
AppearanceWhite powderThe same wording against a retained sampleColour drift across lots
Shelf life2 yearsRelease date and expiry date, both datedWhich date the clock starts from

The table records what each page states and what the certificate is expected to add. It does not supply a molecular weight, and it should not be read as one: the figure depends on the lot and on the method, which is precisely why the third and fourth columns exist.

03 Three Grades on One Line: Cosmetic, Food and Medicine

Does the grade name change the assay?

Not necessarily. A grade name is a statement about the document set and the limits that apply to a use, not a promise that the analytical figure differs. Two grades can share one assay line and still differ in what has to be tested, declared and retained alongside the lot.

How should a buyer read a grade line?

As a claim about paperwork rather than about the powder. The useful question is not "which grade is better" but "which limits does this grade bring with it, and where are they written". Put that in the email and read the answer as part of the specification.

04 HPLC and the Methods That Actually Size a Chain

What does HPLC establish on this page?

Identity and content for the prepared sample under the stated conditions. A method written to produce a single main peak will report a single main peak, and the figure derived from that peak is a content figure. The chromatogram describes what the column resolved, not how long the chains were. Our note on a single-analyte material makes the same distinction between what a method measures and what a buyer reads into it.

Which methods report a chain length?

Viscometry, size-exclusion chromatography and gel electrophoresis are the conventional families, and each returns an average under its own convention. None of them is a better version of the others; they answer the same question with different weightings, which is why the method name has to appear beside the figure rather than in a general statement.

hyaluronic acid 99% powder bulk
Figure 1 - White powder as the specification sheet declares it, the appearance line that sits beside the content figure.

05 Hyaluronic Acid or Sodium Hyaluronate: The Name on the Label

Are the two names interchangeable on a certificate?

No. They are different names, and the certificate should carry the one that describes what is in the drum. A quotation, a label and a certificate that use three different names for one lot is a filing problem now and a documentary problem at the border later.

Which name should the purchase order use?

The one the certificate will print, spelled identically, with the salt form stated in the same sentence. Where the grade line and the name line disagree about the form, hold the order and ask, rather than choosing the reading that suits the price.

Naming is not a formality, and it is cheaper to fix before the first shipment than after the first query.

06 White Powder, Two-year Shelf Life: Storage and Packing

Why does the packing matter for a white powder?

Because the material takes up water from the air, and a powder that has taken up water is a different material by the time it is opened. The inner layer is the barrier that decides how much of that happens in transit. Ask which inner layer the standard hyaluronic acid unit uses, whether it is sealed, and whether the export unit is the same one described.

When does the two-year clock start?

From the release date of the lot, not from the date of your order. Ask for both dates on the label and in the certificate, and read a certificate without a release date as incomplete. Two-year shelf life printed on a page is a property of the grade; the date on your drum is what governs your inventory.

hyaluronic acid COA and test method
Figure 2 - A laboratory bench where content and chain-length methods are run on the same sample.

07 Comparing Two Quotations Field by Field

Which fields must line up before two quotations are comparable?

Six: the name with its salt form, the content figure with its method, the grade claimed with its document set, the molecular weight line with its convention, the pack unit with its inner layer, and the documents due per lot. Two quotations that agree on the content figure and disagree elsewhere are not quotations for the same material.

What if one quotation leaves the molecular weight out?

Then the comparison waits. An unanswered request is a reason to hold the comparison, not a reason to assume the two are equivalent. Applying the same six fields to a supplier rather than to a single lot is the exercise described in another powder specification sheet we published.

08 Documents to Request Before You Book

Which documents should arrive before a booking?

Four: the specification sheet, the certificate for the lot offered, a packing statement naming the inner layer, and a written statement of the salt form. Where a molecular weight is part of your requirement, add the method and convention to that list. Reading a certificate line by line against the specification is the discipline set out in our notes on a glycosaminoglycan COA.

What should a buyer do when a document is incomplete?

Ask once, in writing, naming the missing line. A supplier who can answer will answer precisely; one who cannot has told you something about the file before you have paid for anything. Run that check against a candidate rather than a single lot, and the same four documents become the basis of a supplier judgement, as set out in verifying a supplier before booking.

09 What to Put in Your Own Purchase Specification

Which lines belong in your own specification?

Six, written before the first email: the name with its salt form, the content as a window with its method, the grade claimed with its document set, the molecular weight with its convention if length matters to you, the pack unit with its inner layer, and the documents due per lot. Each line removes a question that would otherwise arrive after the order.

A specification written first comes back answered precisely. One that asks for the material and leaves the rest open comes back as a quotation that must be re-read line by line. The same order of work is what we describe in grade and packing practice, where the field order carries most of the meaning.

hyaluronic acid 25 kg fibre drum export packing
Figure 3 - 25 kg fibre drums palletised and wrapped, the unit a packing statement is written against.

10 Frequently Asked Questions

Does 99% purity tell me the molecular weight?

No. Content and length are independent properties, and a content figure is silent on both the average and the distribution. Two lots can report 99% and differ in chain length.

Which line should a molecular weight figure sit on in a specification?

Its own line, in the body of the table, with the method and the weighting convention beside it. A figure placed in a footnote tends to disappear at the next revision.

How is molecular weight determined, and does the method change the number?

Viscometry, size-exclusion chromatography and gel electrophoresis are the conventional families, and each returns an average under its own convention. Different conventions can give different figures for the same lot, so the method has to travel with the number.

Are hyaluronic acid and sodium hyaluronate the same material on a certificate?

They are different names, and the certificate should carry the one that describes the drum. Ask for the salt form in the same sentence as the name, and require the same spelling across the order, the label and the certificate.

What changes between cosmetic, food and medicine grade in the documents?

The document set and the limits that apply to a use, not necessarily the content figure. Ask which limits the claimed grade brings with it, and have the answer written into the specification rather than into an email footer.

How should the powder be stored and packed for a two-year shelf life?

In a unit whose inner layer limits water uptake, sealed, with the release date and the expiry date both printed. The shelf life printed on a page describes the grade; the dates on your drum govern your inventory.

11 Request a Specification Sheet

If you are qualifying hyaluronic acid, tell us the salt form you need, the content window your process requires, and whether a molecular weight line has to appear on the certificate - and with which method. We will send the specification sheet for that grade, the certificate for the lot we would ship, and a written statement of the salt form it names, so the three documents agree before anything is booked.

Email liu@wellgreenxa.com or message us on WhatsApp. We reply within 24 hours. If you already hold a specification from another supplier, send it; naming the two lines that do not match is faster than starting from a blank sheet.

---
SEND INQUIRY

SEND INQUIRY